Ready to clean mildew & Mold from your home?
Mildew & Mold are a surface-dwelling fungus that loves damp, warm, and poorly ventilated spots—think bathrooms, basements, or exterior walls. It feeds on organic materials like drywall or grout, showing up as unsightly black, gray, or white spots. High humidity (above 60%), water leaks, or insufficient airflow are the primary triggers. The good news? This common issue is rarely a structural threat and, in most cases, doesn’t require professional intervention. Mold cleaning can be done by you!
Recommended Supplies for Mold Cleaning
- Tilex Mold & Mildew Remover: Amazon
- Rubber Gloves: Amazon
- Safety Glasses Amazon
- Spray Bottle: Amazon
- Soft Scrub Brush: Amazon
- Dehumidifier: Amazon
Part 1: Gear Up to Clean – safety First
Ready to tackle Mold & mildew cleaning? Suit up with rubber gloves (Amazon link) and safety glasses—bleach fumes and spores can sting your eyes. Open windows or run a fan for airflow. You’re set to take charge.
Part 2: Mix and Apply Your Solution to the Mold Area
Ready to zap that Mold & mildew? Let’s do this! You can mix 1 cup of bleach with 1 gallon of water in a bucket—stir it gently with a spoon—or use Tilex Mold Cleaning & Mildew Remover (Amazon link) for a no-fuss option. First, test it: dab a bit on a hidden spot (like behind a towel rack) with a cloth and wait a minute. No color change? You’re good to go!
Now, grab a sponge or a spray bottle (Amazon link). Dip the sponge in your mix, squeeze out extra drips, and wipe it over the mildew on walls, tiles, or grout—cover it all. Or, fill the spray bottle, hold it 6-8 inches away, and spritz until it’s wet. Set a timer for 5-10 minutes and let it sit—the cleaner’s working its magic. You’ve got this!
Part 3: Scrub, Rinse, and Finish Strong
Found some stubborn mildew spots that won’t budge? No worries—we’ll walk you through it! Grab a soft-bristled scrub brush (like this one: Amazon link)—it’s gentle enough not to scratch your tiles or walls. Dip it in your bleach solution or spray a little extra Tilex on the spot, then scrub lightly in small circles. You don’t need to push hard; let the cleaner do most of the work. After a minute or two, the mildew should start lifting.
Next, rinse it off. Wet a clean cloth with water (or use a sponge if you’ve got one), and gently wipe the area to remove the bleach and loosened mildew. If you’re near a shower or sink, you can splash a little water instead—just don’t soak the wall too much. Now, grab a dry towel and pat the area completely dry. This step’s key—leftover moisture invites mildew back!
Boom Tips for Mold and Mildew Prevention
- Boost Ventilation: Run a bathroom exhaust fan or crack a window during and after showers to cut down on moisture buildup.
- Keep It Dry: Wipe down wet surfaces like tiles, walls, or shower curtains after use to starve mildew of its damp playground.
- Seal Leaks: Fix dripping faucets or pipes ASAP to prevent water from pooling and feeding fungal growth.
- Control Humidity: Use a dehumidifier (like this top-rated model on Amazon) in humid areas to maintain dry air.
